The ideal tool for aerial inspections, agriculture, surveying, and other industrial applications.
The D-RTK 2 Mobile Station is DJI's upgraded high-precision receiver.
Capable of supporting all major global satellite navigation systems, it provides users with real-time differential corrections that generate centimeter-level positioning data for improved relative accuracy.
Centimeter-level positioning improvement: Its integrated high-gain antenna ensures better real-time reception of signals from a greater number of satellites (GLONASS, GPS, Beidou, and GALILEO), with or without obstruction in its environment.
Stay connected throughout the mission: It supports communication via OcuSync, WiFi, LAN, and 4G to ensure stable and uninterrupted data transmission at all times. Connect up to 5 remote controllers (MG-1P and Phantom 4 RTK standard remote controllers) simultaneously for coordinated operations between multiple drones.
A durable investment: With an IP47 rating and a lightweight carbon fiber body, the D-RTK 2 Mobile Station can withstand wear and tear while being ultra-portable. Its integrated IMUs monitor movements and calibrate tilt sensors to alert you to any anomalies, allowing you to minimize the risk of damage.
Your comprehensive and advanced solution: Fully compatible with the Phantom 4 RTK and MG-1P RTK, the unit can be used as a continuous operating reference station (CORS), providing accurate positioning data in the area covered by the base station.
An essential accessory for the D-RTK 2 to achieve centimeter-level accuracy for drone surveying and mapping projects.
The tripod for the high-precision D-RTK 2 GNSS mobile station works in conjunction with the DJI D-RTK 2 Mobile Station to provide a stable platform for establishing a GNSS connection.
Designed to securely anchor to the ground with spikes at the ends of each of the three legs. With a height of 3.3 feet and leg extension of up to 23.6 inches, it ensures a robust GNSS connection for the D-RTK 2.
Charge up to 4 drone batteries and 4 controller batteries simultaneously.
Portable and user-friendly, the BS60 battery station can be used for charging, storing, and transporting batteries.
It has the capability to charge four drone batteries and four controller batteries at once, allowing for seamless battery swaps during missions.
Designed as a trolley suitcase, you can easily transport it anywhere.
A power source of 220-240V is required for the battery station. It takes approximately 60 minutes to fully charge two TB60 Intelligent Flight Batteries and 30 minutes to charge them from 20% to 90% of their capacity.
Efficient Aerial Spraying and Spreading Solution
The Agras T10 features a 10L spraying tank and a 10kg spreading container. It is also IP67 certified for reliable performance in adverse weather conditions and benefits from an RTK module for centimeter-level positioning.
Monitor autonomous and manual flights with front and rear dual FPV cameras, as well as a spherical radar detection system to maximize safety during operations.
The DJI Agras T10 drone offers a range of key features to enhance agricultural workflows.
An effective aerial spraying and spreading solution for the DJI Agras T30 Agriculture Drone.
With a 30-liter spraying tank, the DJI Agras T30 elevates the efficiency of aerial spraying to a new level.
Its transformative body enables more efficient and precise spraying, especially for fruit trees, helping reduce fertilizer usage and increase crop yields.
Save valuable time by gathering more data in a single flight with the H20T.
The Zenmuse H20T Quad Sensor solution combines the power of a wide-angle camera, a zoom camera, a thermal imaging unit, and a laser rangefinder.
With the H20T, pilots can now collect more data without the need to land and switch payloads.
In combination with the DJI Matrice, create real-time 3D point clouds with extremely high precision and detail for accurate reconstruction.
The LiDAR sensor Livox Mid70, high-precision IMU, and a visual assistance camera with a 1-inch 20-megapixel CMOS camera with a mechanical shutter on a 3-axis gimbal are integrated into the Zenmuse L1.
The L1 provides an incredibly powerful all-in-one LiDAR solution in the air when used with the DJI Matrice 300 RTK and DJI Terra.
Designed for photogrammetry flight missions, it takes efficiency and precision to the next level.
The Zenmuse P1 incorporates a full-frame sensor with interchangeable fixed-focus lenses on a 3-axis stabilized gimbal.
For reliable transmission up to 15 km:
The DJI Smart Controller Enterprise for the Matrice 300 series utilizes OcuSync 2.0 technology and supports 1080p video on three channels.
The controller features an integrated tablet with a high-brightness 5.5-inch 1080p screen for superior outdoor visibility.
The remote controller is powered by a dual-battery system that includes a 5000mAh internal battery and the DJI WB37 battery to provide up to 4.5 hours of continuous operation.